TCL
PUSH DISPLAY (OSD) ON REMOTE + VOLUME DOWN DI TV ,HOLD 3 second
POSISI TV STNDBY,TEKAN VOLUME UP + VOLIME DOWN PADA TV BERSAMAAN DAN TAHAN HINGGA TV ON
.
AKARI
TEKAN SLEEP DI REMOTE + MENU TV
Panasonic CT-215785
Turn on TV, short-circuit points FA1 - FA2. Press ACTION (or MENU) and
VOL + simultaneously. Press POWER on the remote control to select
sub menu of services. With CANAL + / - select the item, with VOL + / –
adjusts the value. To exit press POWER and ACTION (or MENU) simultaneously
2 or 3 seconds.
Panasonic TX-33AK10.
Bass to max.Treble to min.Hold down “index”
Press “-” (minus) on the front of the set
Service Menu Panasonic TAU
With the TV on, adjust the volume to a minimum, put the key in OFF-ON TIMER.
Press RECALL on the remote control and simultaneously in the TV-VOL. With keys 1 and
2, selects nodes adjustment (CHK1, CHK2, …) with the keys 3 and 4 selected items with VOL + / - adjusts the values.
Service Menu Panasonic MX-3
CTV Hotel Mode
ON: Press simultaneously ‘OFF TIMER’ on remote control and ‘CH.UP’ local.
OFF: Press simultaneously ‘OFF TIMER’ on remote control and ‘VOL-’ loca
Service Menu Panasonic TX-25W3E
Increase the bass to maximum, decrease treble to minimum, press RESET on the remote control and while in the TV-volume. Using the Teletext press RED and GREEN selects the
item with Blue and Yellow line values. To store the new press STORE. To exit NORM (normalization).
Service Menu Panasonic TX-25W3E
Increase the bass to maximum, decrease treble to minimum, press RESET on the remote control and while in the TV-volume. Using the Teletext press RED and GREEN selects the item with Blue and Yellow line values. To store the new press STORE. To exit NORM (normalization).
politron
Turn the TV on.
- Press and hold the menu button on the remote until
- Press the {1} {0} {1} {3} buttons on the remote control. The Service Menu will be displayed
Philips Factory mode
- POSISI TV STNDBY,TEKAN 0,6,2,5,9,MENU
- # Press {0} {6} {2} {5} {9} {7} {INFO+} on the remote.
or
# Press {0} {6} {2} {5} {9} {7} {STATUS} on the remote.
or
# Press {0} {6} {2} {5} {9} {7} {MENU} on the remote. # Turn the TV off to exit the Service Menu.
- Press {0} {6} {2} {5} {9} {6} {INFO+} on the remote.
or
* Press {0} {6} {2} {5} {9} {6} {STATUS} on the remote.
or
* Press {0} {6} {2} {5} {9} {6} {MENU} on the remote. * Turn the TV off to exit the Service Menu.
- Press {0} {6} {1} {5} {9} {6} {MENU} on the remote.
or
* Press {0} {6} {1} {5} {9} {7} {MENU} on the remote. * Turn the TV Off to exit the Service Menu.
- Press {1} {6} {2} {5} {9} {6} {MENU} on the remote.
or
* Press {1} {6} {2} {5} {9} {6} {STATUS} on the remote. * Turn the TV off to exit the Service Menu.
- With the TV off: * Press {0} {6} {2} {5} {9} {6} {STATUS} on the remote. * Turn the TV off to exit the Service Menu.
- L9.1 CTV Hotel Mode
Select program 38 on the TV. Simultaneously press the keys VOLUME- and VOLUME+ on the keyboard of the TV and the OSD key of the remote control.
hitaci
RPTVs :
F59 SERIES
* Press and hold the {MENU} button on the TV.
* Then press the {MENU} {8} {SELECT} buttons on the remote.
* To exit, press the {MENU} button on the TV or
the {EXIT} button on the remote control.
DCAM Mode:
* Using the remote control:
* Hold down the {TV} button.
* Press the {MENU} button.
* Press the {INFO} button.
* Release the {TV} button.
* Remote Control Key Functions When In DCAM Mode:
{INPUT} …………. Blue (13×9 adjust)
{ASPECT} ………… ROM Write
{DAY/NIGHT} ……… ROM Read
{MENU} ………….. Remove Color
{EXIT} ………….. Cross Hatch/Video Mode
{INFO} ………….. Green
{GUIDE} …………. Calculation
{2} …………….. Cursor UP
{5} …………….. Cursor DOWN
{6} …………….. Cursor RIGHT
{4} …………….. Cursor LEFT
{0} …………….. RED (7×5 Adjust)
{STOP} ………….. Initialize
{PLAY} ………….. Raster Position
{FAST FORWARD} …… Phase
To Exit The DCAM Mode:
* Press and hold the {TV} button.
* Press the {0} button.
* Press the {1} button.
* Release the {TV} button
MISC :
* Turn the TV on.
* Press the {MENU} {MENU} {8} {SELECT} buttons on the remote.
* The Service Menu will be displayed.
* Use the {UP} {DOWN} buttons to select items.
* Use the {LEFT} {RIGHT} to change the data.
* Press the {EXIT} button to exit the Service Menu.
* Turn the TV off.
* Press and hold the {INPUT} button on the TV then press {POWER}.
* Hold both buttons until the TV powers on
with the Service Menu displayed.
* Use the {UP} {DOWN} buttons to select items.
* Use the {LEFT} {RIGHT} to change the data.
* Press the {EXIT} button to exit the Service Menu.
* Turn the TV off.
* Press {POWER} & {INPUT} buttons on the TV for more than 3 sec.
* The Service Menu will be displayed.
* The letter “P” indicates picture and “A” indicates audio.
* Use the {UP} {DOWN} buttons to select items.
* Use the {LEFT} {RIGHT} to change the data.
* Press the {EXIT} key to exit the Service Menu
jvc
METHOD 1
Press DISPLAY and VIDEO STATUS on the remote control simultaneously to
enter the SERVICE MENU
Press MENU UP/DOWN to select an item (including other menus)
Press MENU LEFT/RIGHT to adjust
Press EXIT to return to a previous menu. Press again to EXIT
METHOD 2
Press SLEEP TIMER and set the SLEEP TIMER for “0″ MIN.
Press DISPLAY and VIDEO STATUS at the same time (while
The SLEEP TIMER information is still on screen) to enter the SERVICE MENU
Press MENU UP/DOWN to select an item (including other menus)
Press MENU LEFT/RIGHT to adjust
Press EXIT to return to a previous menu. Press again to EXIT
METHOD 3
I have used this on JVC sets from 1995:
Set the clock to 3:21 AM.
Start the clock as you normally would but press MUTE while “Thank you”
is flashing.
Press MENU up or down just after MUTE.
Use UP/ DOWN to select options and LEFT/ RIGHT to adjust. The settings
are automatically saved when you exit.
Samsung
- Turn TV off
Press: MUTE 1 8 2 POWER
TV will power up in service mode and GAMMA GAIN1 will be displayed on
the screen
Use VOL+ and VOL - to select an item
Use MUTE and the MENU to adjust
Use ADD to save the settings - CHASSIS: SCT51A
Turn TV off
Press SLEEP P.STD MUTE - CHASSIS: SCT11A, SCT11B, SCV11A, SCV11B
Press P.STD MENU SLEEP POWER ON
Perform adjustments with VOL + and VOL -
Select between adjustments with CH + and CH -
Thoshiba
- Turn the TV on.
* Press and hold the {VOL-} button on the TV.
* Press and hold the {9} button on the remote.
* The Service Menu will be displayed.
* Use the {CH+} or {CH-} buttons to select the item.
* Use the {VOL+} and {VOL -} buttons to adjust the value.
* Turn the set off to exit the Service Menu.
LCDs :
* Press the {MENU} button on the remote.
* Highlight the “Picture” icon.
* Press the {9} {3} {0} {1} buttons
on the remote control.
* The Service Menu will be displayed
with the following Modes:
“Options” - “Adjustments” - “Selections”
* Use the {OK} button to access and
navigate through these Modes.
* To change values use {VOL +} {VOL-) {P+} {P-}
* To exit, press the {MENU} button.
Sony
- # Using the remote control:
# Turn the TV off.
# Press {DISPLAY} {5} {VOL+} {
or
Press {DISPLAY} {5} {
# The Service Menu will be displayed.
# Use numbers {1} and {4} to select the item to adjust.
# Use numbers {3} and {6} to adjust the value of the data.
# Press {MUTE} then {ENTER} to save new settings.
# The words “WRITE” in red will show up in the upper right corner if saved.
# Turn the TV off to exit the service menu.
- PROJECTORS :
* Service Menu :
* Using the remote control
* Press {ENTER} {ENTER} {UP ARROW} {DOWN ARROW} {ENTER}.
* Then {UP ARROW} when it asks: “Do you want to enter the Service Mode?”.
* Factory Mode :
* Using the remote control
* Press {ENTER} {ENTER} {LEFT ARROW} {ENTER}.
* Then {UP ARROW} when it asks: “Do you want to enter the Factory Mode?”.
* Any additional menus usually pop up under the main INFORMATION menu.
* Access “Menu” and make sure “Status” is On.
* Exit the “Menu”.
* Service Menu :
* Using the remote control
* Press {ENTER} {ENTER} {UP ARROW} {DOWN ARROW} {ENTER}.
* Select “Yes” when it asks: “Do you want to enter the Service Mode?”.
* Factory Mode :
* Using the remote control
* Press {ENTER} {ENTER} {LEFT ARROW} {ENTER}.
* Select “Yes” when it asks: “Do you want to enter the Factory Mode?
Lg
The quote from the manual is: Adjustment method:1) Enter the adjust mode by pressing the IN-START button which seems to suggest its going to need the remote “in-start” button only exists on service remote mate, part number 105-201M
LG
MC64 CTV Service Mode
Simultaneous press OK on RC & local panel.